Posted on

planting germinated autoflower seeds

A pack of seeds may be feminized or non-feminized, which can consist of male and female seeds. The best for a beginner grower is feminized ones, so the effort of taking away the male plants won’t be a bother. Feminized seeds are easy to grow and practical since there is no need to constantly look for male plants once they grow. Thus, there are no seeds wasted on the process. Now that your seeds are ready and secure, the next thing to do is decide which method to use to germinate autoflowering seeds.

Different agents will have an effect on how to germinate autoflowering seeds and may be responsible for how the plant will turn and grow. First is the temperature. If the soil is extra cold or extremely hot for the plant, the seed may have a hard time growing. The recommended temperature must be more or less 25 degrees Celsius. The soil is where the plant will first take its root; hence, it is also needed to get the best possible soil for the plant. There are soils sold with pre-mixed nutrients already that can be helpful for the germination process.

Things to consider on how to germinate autoflowering seeds

There are many autoflower strains available in the market, and all could cater to your preference. The first step is always deciding the kind of strain to grow. For an expert grower, this might be easy. But for those beginner growers, it is essential to ask more questions and inquire about the seeds you may want to grow. There are a lot of seed distributors, so make sure to find a legit reputable distributor to get the best seed possible. It is better to invest in such than paying less for the kinds of seeds you are not sure of.

You might just have decided to grow your marijuana plant and would want to get the possible details available to let you get set and ready for the planting process. Growing the marijuana plant is easy, with some helpful tips to guide you in each stage in order to ensure a good yield at the end. Once you decide to grow autoflower plants, there are significant things to remember. Since autoflower plants need careful consideration, there is a need to master the first step, which is learning how to germinate autoflowering seeds.

With the three different methods, the grower will have more ways to experiment to get the best method to germinate autoflowering seeds. It is even possible to do the three steps all together to compare which methods work the best. Knowing whichever is the best lies in the trial and error attempts done by the grower. This experience will help the cultivator get more knowledge about germinating autoflower plants and growing them. These methods are proven effective with advantages and a few disadvantages on the side. What matters most is how careful and meticulous you are when it comes to handling the seeds.

Start by filling pots with a premium-quality soil that has been soaked in water. Many growers also choose to lace the water with a root stimulator. Make a hole roughly 10–15mm deep. This will be your seed’s new home. Remove the seeds from their packet and place them into the pre-dug holes. Loosely cover the seeds, but be careful not to compress the soil above the seed too much. The root will struggle to penetrate solid soil, slowing plant growth. Lightly spray the top of where you placed the seed so that your growing medium stays moist.

You will need to invest in a few pieces of unique equipment, but by using stone wool blocks, you can create a perfect utopia for germinating cannabis seeds. Soak the stone wool blocks in the same way you would a soil medium. The wool will retain the moisture and prevent the need to water during the early stages of germination. After the wool blocks are soaked, stick them in a plastic tray that also has a lid. Large cake tubs are ideal.

Before you can be met with bountiful hauls of dank buds, there are several stages of cannabis growing that take precedence. Unless you can successfully germinate cannabis seeds, you won’t have a plant to harvest. Give your seeds the best possible start in life by reading our definitive guide to germination.

GLASS OF WATER APPROACH

Place one sheet of damp kitchen towel on a flat surface. Space your seeds a few centimetres apart before placing the second piece of kitchen towel over the top. You need to ensure both pieces are damp, not wet. Once again, when the white root tips reach 2–3mm, move the seeds (carefully) to soil pots. Use the same guidance found above for planting techniques.

The dome of the plastic container will create your seeds’ own mini tropical climate. If you then place all the components in a temperature-controlled cupboard, you will have created a self-perpetuating supply of moisture—no need to touch the seeds again until they are ready to be transferred to your final growing medium as a young seedling. Using the stone wool block method, your seeds should germinate in one to two days.

• The ideal temperature is between 22° and 25°C (71–77°F)
• Your growing environment should be damp/moist, but never wet
• Relative humidity range should be between 70% and 90%
• Seeds favour fluorescent lighting (Cool White code 33)
• Minimise the amount of seed handling you do
• In hydroponic/rockwool plugs, the ideal PH value is 5.8–6.2

Timescales can vary, as it all depends on how ideal your germination environment is (see the golden rules above). Even the worst grower could make a seed germinate, but it may take a few weeks and, of course, increases the risk of a weaker plant.

Seed germination is the first part of a successful grow cycle, to help you start your cannabis plants with the right foot, here’s an autoflower germination guide that can be used not only for cannabis but for tomatoes, mangos, strawberries. you name it!

So to help your weed seed germinate, you can use a knife or any other tool with a thin point to gently insert it in between the ridges and slightly separate it, after this process, you can soak your water and germinate it like you normally would.

1. First Things First: Know the anatomy of your cannabis seed

As you may know, cannabis plants need certain conditions depending on the stage they’re in, maintaining these conditions are the best way to ensure your plants will thrive, and when talking about seeds and germination, it’s no different.

First of all, we need to understand the anatomy of a cannabis seed.

The process of autoflower germination can take up to 10 days, in order to do everything correctly and know if everything’s going well, we need to know a little bit more about the seed.